Numerical Investigation of the Jacketing Method of Reinforced Concrete Column
Abstract:The first intent of this study is to develop a finite element model that can predict correctly the behavior of the reinforced concrete column. Second aim is to use the finite element model to investigate and evaluate the effect of the strengthening method by jacketing of the reinforced concrete column, by considering different interface contact between the old and the new concrete. Four models were evaluated, one by considering perfect contact, the other three models by using friction coefficient of 0.1, 0.3 and 0.5. The simulation was carried out by using Abaqus software. The obtained results show that the jacketing reinforcement led to significant increase of the global performance of the behavior of the simulated reinforced concrete column.
 S. Raza, et al, “Strengthening and Repair of Reinforced Concrete Columns by Jacketing: State-of-the-Art Review,” Sustainability, vol. 11 no. 11, pp. 3208, 2019.
 S. Fatih, “An experimental study of the jacketed reinforced-concrete beams under bending,” Construction and Building Materials, vol. 18, no 8, p. 611-618, 2004.
 L. Jinbo, et al, “Seismic behavior of corrosion-damaged reinforced concrete columns strengthened using combined carbon fiber-reinforced polymer and steel jacket,” Construction and Building Materials, vol. 23, no 7, p. 2653-2663,2009
 Abaqus ABAQUS analysis user’s manual version 6.12 (2012). Pawtucket (RI): Hibbitt, Karlsson &Sorensen.
 Sadone. Raphaelle, Quiertant. Marc, Mercier. Julien, et al., “Experimental study on RC columns retrofitted by FRP and subjected to seismic loading”, in : 6th International Conference on FRP Composites in Civil Engineering CICE. 2012.
 A. kezmane, et al, “3D modelling of reinforced concrete slab with yielding supports subject to impact load,” European Journal of Environmental and Civil Engineering., vol. 21, no. 7-8, pp. 988-1025, July 2016.
 A. kezmane, et al, “Optimization of the Reinforcement Positioning in the Squat Reinforcement Concrete Walls,” IACSIT International Journal of Engineering and Technology, vol. 5, no. 5, 2013.